Advertisement
MA1 NT ENANCE
CAUTION:
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down
to the limit mark. Keep the carbon brushes
clean and free to slip in
the
holders. Both
carbon brushes should be replaced
a t
the
same time. Use only identical carbon
brushes.
Use a screwdriver
to
remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure the
brush holder caps.
CAUTION :
Never remove the breather
housing.
It is
not an
oil
cap.
from the
gear
;
L
i
m
i
t
mark
L
Fig.
17
7Brush
holder cap
I
Fig.
18
///
Fig. 1
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
12
Advertisement
