Advertisement
Operating
Instructions
(continued)
TIMER; DELAY STOP / START FEATURE
timer
l
" coo_heat
temp/tim_,
[an
only
.r
MODE
ON-OFF
\
FIRST
DO
THIS;
PRESS
TIMER
BUTTON
Note:
For
Delay
Stop,
the
unit
must
be
in the
On
position.
Note:
For
Delay
Start,
the
unit
must
be in the
Off
position,
THEN
DO THIS;
PRESS
UP/DOWN
BUTTONS
YOU WILL SEE HOW MUCH TIME IS CHOSEN;
timer
[
" econC°°lheat
temp/tim_r
[an only
.r
[]
MODE
V
ON-0FF
First, Press TIMER button,
then adjust
timer setting,
tap or hold the UP arrow
( A ) or the DOWN arrow
( V ) to change delay
timer at 0,5 hour increments,
up to 10 hours, then
at t hour increments
up to 24 hours. The control
will count down the time
remaining
until start (8, 7.5, 7, etc.), The Delay Start
Operation
automatically
selects cooling with maximum
Fan speed (if Cool,
Energy Saver, or Fan Only was the last mode selected),
The temperature
maintained
will be the same as previously
set. To change
the set temperature,
press "COOL" then
Up or Down arrows
until the desired
temperature
is indicated
on the display.
After 5
seconds,
the control will automatically
change
the display
back to the hours
remaining
until the unit will start/stop,
Pressing the
unit On/Off
button
at any time will cancel the Delay Start/Stop
function,
The Delay Start/Stop
Feature will work
until the unit either
starts or stops. Once that happens
the above steps have to be repeated
again.
CHECK
FILTER
FEATURE_
YOU
WILL
SEE:
8
Advertisement
