Frigidaire FFLG2022MW3 Installation Manual page 18

Connecting venting
:1. Remove the two screws (items A, to the right)
securing the dryer front access panel to the
dryer cabinet, Lift the panel until the tabs can be
disengaged from the cabinet, remove the panel and
set aside.
2 Connect the exhaust duct to the outside exhaust
system, Use of a 4" (!0.2 cm) damp (item B, to the
right) is recommended to connect the dryer to the
exhaust vent system. Use metal foil tape to seal ait
other joints,
3 ReinstaJJ the dryer front access panel
4 Carefully slide the laundry center to its final
position. Recheck for level and rock corners for
stability,
I