Control Panel Features - LG DLG3051W Owner's Manual

10 INTRODUCING YOUR DRYER
Control
panel
features
Following are instructions for starting and using your new dryer, Please refer to specific sections of
this manual for more detailed information,
f_WARNING: To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
including the Important Safety Instructions, before operating this dryer.
Cycle Selector Knob
LED Display
Power Button Start/Pause Dry Level Time Dry Temp.
Button Button Button Control
Button
Operation
I Description
Button
* POWER ON/OFF BUTTON
- Press to turn the dryer ON. Press again to turn the dryer OFF.
NOTE : Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost.
Cotton/Normam MANUA r;FtY
Perm.Press _ ........... ...................................... Speed Dry
DeJicates ..... Freshen Up
Towels ...................... _ _ - Air Dry
iii!iiiiiii_Xi_iiiii_iiii_i(iii_i!i!i
* CYCLE SELECTOR KNOB
- Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets
will be shown in the display. On MANUAL DRY cycles, these settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
* START/PAUSE BUTTON
- Press this button to START the selected cycle. If the dryer is running, use this button to PAUSE the cycle
without losing the current settings.
NOTE : If you do not press the START/PAUSE button to resume a cycle within 4 minutes, the dryer turns off
automatically.
* MORE TIME/LESS TIME BUTTONS
- To adjust the drying time, use these buttons with MANUAL DRY and TIME DRY.
Press the MORE TIME button to increase the selected manual cycle time by a minute; press LESS TIME to
decrease the cycle time by a minute.
* CYCLE SETTING BUTTONS
- Use these buttons to select the desired cycle settings for the selected cycle.The current settings are shown
in the display. Press the button for that option to view and select other settings.
* OPTION BUTTONS
-The OPTION buttons allow you to select additional cycle options. Not all settings are available for all cycles.
Refer to the CYCLE GUIDE section of the manual.