Maintenance; Stair Cleaning; Cord Rewind And Storage; How To Clean Tools - Hoover UH70820 Owner's Manual

STAIR CLEANING
3.4 Lift vacuum by Stair Cleaning Handle and
position on stairs. Clean forward to back. Never
leave the vacuum standing on stairs when not
cleaning.
3.5 Use the Hose and Powered Hand Tool
(Tool varies per model) for stair cleaning. When
using tools, always ensure handle is in upright
position.
CAUTION A
Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner
from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture,
as it may result in injury or damage. When using tools, always ensure handle is in upright position.
CORD STORAGE
For units without cord reel)
2.3 Wrap cord around
hooks for convenient
storage. Attach the plug
end to the cord.
CORD REWIND AND STORAGE
rAvailable on select models only)
2.4 To return cord for
storage, unplug from
wall. Hold plug and
press down Cord
Release Pedal (A) on
side of cord reel.
A WARNING
Hold plug when rewinding onto cord reel. Do
not allow plug to whip when rewinding.
HOW TO CLEANTOOLS
To clean Hose and Powered Hand Tool, wipe with a damp cloth. DO NOT submerge in water.
Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry 24 hours before using.
Familiarize yourself with these home maintenance tasks as proper use and care
of your vacuum will ensure continued cleaning effectiveness.
4.1 The System Check Indicator located at (A), alerts you to possible system
performance issues.
If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, take it to a service center prior to continuing use.
PROBLEM
If System Check
Indicator is red:
POSSIBLECAUSE POSSIBLESOLUTION
2. Dirt cup is full and/or clogged.
_ toil d/o sol
2. Empty dirt cup - reference pg. 9
sefe:i_ _ _re _
Any other servicing should be done by an authorized service representative.
Actual model may vary from images shown. 8