Frigidaire FFRE08B3Q10 Use & Care Manual page 8

Operating Instructions
(continued)
TIMER; DELAY STOP / START FEATURE
f temp/timer
air
timer
\ \/
THEN
FIRST
DO
THIS:
DO THIS;
PRESS PRESS
TIMER BUTTON UP/DOWN BUTTONS
YOU WILL SEE HOW MUCH TIME IS CHOSEN;
f
clean \ _ cool remote
L econ sensing
air
,#an only
m
timer MODE V
temp/tirner
m
Hr
ON-OFF A
Note: For Delay Stop, the unit must be in the On position.
Note: For Delay Start, the unit must be in the Off position,
First, Press TIMER button, then adiust timer setting, tap or hold the UP arrow ( A ) or the DOWN arrow ( V ) to change delay
timer at 0,5 hour increments, up to 10 hours, then at t hour increments up to 24 hours. The control will count down the time
remaining until start (8, 7.5, 7, etc.), The Delay Start Operation automatically selects cooling with maximum Fan speed (if Cool,
Energy Saver, or Fan Only was the last mode selected) , The temperature maintained will be the same as previously set. To change
the set temperature, press "COOL" then Up or Down arrows until the desired temperature is indicated on the display. After 5
seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop, Pressing the
unit On/Off button at any time will cancel the Delay Start/Stop function. The Delay Start/Stop Feature will work until the unit either
starts or stops. Once that happens the above steps have to be repeated again.
CHECK FILTER FEATURErYOU WILL SEE:
F
auto
[]
to reset
ON-OFF A FAN SPEED s[eep
Note: This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation, The LED
(light) will illuminate after 250 hours of operation. To reset
after cleaning the filter, press the "Filter Reset" button and
the light will go off.
CLEAN AIR FEATURE(on some models):
_emp/timer
ON-OFF
I
auto 1
_ mh_ " /
fi[ter
"_ la .] reset
A FAN SPEE_
alr_ _. ,#a_ only.... ing
!!me;\MODE
v
F
m
ON-OFF A
deaa
. coot
remote
L ecan sensing
air
fan on@
F
m
timer MODE V ON-OFF A
8
l_ i Note: When this feature is "ON", the electronic air purifier is
DO THIS: energized to remove pollen and impurities from the air. To
PRESS 1 cancel this feature, press the Clean Air button (the LIGHT
CLEAN AIR will turn off),
BUTTON Note: This feature can be activated on the unit touch pad
ONLY,
................................................................................................................................................................................... All righ!s rese_ed.
_________