Af Assist; Motion Detection - Nikon Coolpix S710 User Manual

VI
:::r
o
o
~.
::J
'P
-0
QI
'<
0-
QI
n
"
Q I
::J
C.
VI
fi)
-
C
"'0
~
fi)
::J
C
In
124
Basic Camera Setup: The Setup Menu
~.~
Motion detection
Set motion detection which automatically increases the shutter speed in shooting
still pictures to reduce the camera and subject blurs.
Auto (default setting)
When camera detects the movement of the subject or camera shake, the shutter
speed will be increased for reducing the blur.
However, motion detection is not active when the flash fires.
In addition, motion detection is set to
Off
in the following shooting modes
regardless of the setting.
• When the scene mode is set to
Night portrait
(~ 35),
Fireworks show
(~ 38)
or Backlight
(~ 39)
• When the shooting mode is set to High-speed continuous mode (~48).
• When the shooting mode is set to
p, 5,
Rand
M
(~50)
Off
Motion detection is not enabled.
The motion detection setting can be confirmed on the monitor during shooting
(See "The vibration reduction
I
motion detection icon"
(~
21 )).
~
Notes on Motion detection
• Motion detection may not be able to completely reduce the camera and subject blurs in some
situations.
• If the subject is extremely blurred, too dark, the Motion detection won't start.
• The pictures taken may become somewhat grainy.
:It
AF Assist
Change settings for AF-assist illumination.
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. The illuminator has a range of about 1.9 m (6
ft.
2 in.) at the maximum
wide-angle position and 1.1 m (3
ft.
7 in.) at the maximum telescopic position.
However, the AF-assist illumination will not turn on in some scene modes even if
AUTO
is selected (~ 34-38).
Off
Disable this function. The camera may be unable to focus if lighting is poor.