Setting The Timer; Changing Between Continuous Bake Setting/12-Hour Energy Saving Feature - Kenmore 790.42532310 Use & Care Gude

Oven Controls
Setting the Timer
The timer may be set from 1 minute to 11 hours and 59 minutes.
To set the timer:
1. Press Timer ON/OFF.
2. Press and hold A to increase the time. Release A
when the desired time appears in the display.
3. Release and the timer will begin to count down.
4. When the set time has run out, the timer will sound with
three beeps and will continue to beep three times every 60
seconds until Timer ON/OFF is pressed.
To change time remaining in timer, press and hold A or V
to increase or decrease any time remaining.
To cancel the timer at any time, press Timer ON/OFF once.
Important notes:
• The timer does not start or stop the cooking process. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The timer may be used alone or
when any other oven function is active.
• The indicator light located above Timer ON/OFF will glow
when the timer is active.
• The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display will
count down in minutes and seconds. Once the timer has less
than 1 minute remaining only seconds will display.
Changing Between Continuous Bake Setting and 12-Hour
Energy Saving Feature
The oven control has a factory-preset 12-Hour Energy Saving
feature that will turn the oven off automatically if the oven is left
on for more than 12 hours. The control may be programmed to
override this feature to continuously bake.
To change to continuous bake mode:
Press and hold Timer ON/OFF until the control beeps once
(about six seconds). - - hr will appear in display. The control is
set for continuous bake setting.
To change to 12-Hour Energy Saving feature:
Press and hold Timer Set/Off until the control beeps once
(about six seconds). 12hr will now appear in display. The control
is set for 12-Hour Energy Saving feature.
Important note:
Changing between continuous bake or the 12-Hour Energy
saving mode does not change how the cooktop controls
operate.
17