Battery Type Setting; Call Tones; Scramble; Reverse Burst - Motorola RDX Series RDU2080d User Manual

Note: Some frequencies may have FCC transmit
power restrictions that don't allow them to
be set at a higher power level. For details
see the Frequencies and Code Chart
Section.

Battery Type Setting

The RDX™ series radio can be powered by
either Alkaline, Lithium-Ion cells or battery
pack. The battery pack can be detected at
power-up and the corresponding battery level
will be shown on the radio's display.

Call Tones

See "Programming Call Tones" on page 46.

Scramble

See "Programming Scramble

Reverse Burst

Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of either 180/240.
54
English
" on page 44.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Notes:
• The features described are just some of the
features CPS has. There are many more
capabilities that this software offers. For more
information refer to the HELP file in the CPS
• Some of the features available with the CPS
software may vary depending on the Radio
Model.

CLONING RADIOS

You can clone RDX™ Series radio profiles
from one radio (the 'Source' radio) to a second
radio (the 'Target' radio) by using any one of
these 3 methods:
• One Multi Unit Charger (optional accessory)
• Two Single Unit Chargers and a Radio-to-
Radio cloning cable (optional accessory)
• the CPS (free software download)