Diagnostics; Setup Wizards - Cradlepoint MBR1400 User Manual

User Manual / IBR600/IBR650

DIAGNOSTICS

Ping Test
A simple test to check Internet connectivity.
Type the Hostname or IP address of the
computer you want to ping and click the 'Ping'
button.
Speed Test
• Tests Against Cradlepoint Server - Up to
ten speed tests are permitted against a
Cradlepoint server.
• WAN Device - The WAN Device that is
selected will have the test run on it. If no
device is selected then the highest priority
connected device will be used.
• Custom Server - Type the Hostname or IP
address of the server to which you wish to
perform a test. If left empty the test will
be done to a Cradlepoint server.
• Custom Port (Optional) - The port to which
the test is directed.
• Max Duration - The Max Duration is the
Maximum amount of time for which the
test should be run. The test may finish
sooner if sufficient data is collected.
• Data Limit - The Data Limit is the limit of how much data will be transferred while measuring the connection
speed; this should be limited to reduce the expense of a speed test. Setting the limit to 0 will cause the test
to run until enough data is collected or the duration limit is met.
• Test Type - Select the type of test you would like to run. TCP Upload will test speed going to the server, TCP
Download will test speed coming to the client, and UDP will measure the speed going to the server.

SETUP WIZARDS

ECM REGISTRATION
To register the router with
Cradlepoint ECM you must
first have an account.
If you need to create an
account you can signup at
cradlepoint.com.
Once you've created an
account, or if you already
have one, you can enter
your ECM username and password to register the router.
©2015 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
72