Makita 2030N Instruction Manual page 15

.On the Auto-Planer, press down on
both ends of the blades with wooden
levelers.
*On the Jointer,
set
the leveler on the
outfeed table and slide
it
out over the
blade edge. The edge
of
blade should
just contact underside of leveler.
Lock the drum
a t
the position shown in
Fig. 17.
Mount the drum cover and tighten the
hex bolts evenly and alternately.
*After unlocking the drum, press down
the wooden leveler on the blades slight-
ly and turn the knob slowly in the direc-
tion of the arrow. (See Fig. 24).
The wooden leveler should slide about
3 mm (1/8") to 5 mm (3/16") when the
blade setting
is
perfect.
~
Fig. 22
Fig.
23
Fig.
24
15