Mitel SX-2000 Superconsole 2000 User Manual page 72

Route
You are calling a route.
Seized
Confirmation message when you access a trunk.
Select Paging Zone
Enter the number of the zone which you wish to access by
the Pager.
Selected Operation Not Being Acknowledged.
Request is Abandoned
The telephone system is not processing your request. Try again
later or verify your operation.
Selected Trunk
Indicates that a particular trunk has been selected for use.
Serial
Indicates a caller who wants to talk to several people in
succession.
Serial - Busy
The Serial call has returned to your console because the
destination is busy.
Serial - No Answer
The Serial call has returned to your console because the
destination did not answer before a predetermined period of time.
Serial - Recall
The Serial call you made was successful.
Set MSG waiting for Station # :
Enter the number of the extension on which you wish to set a
Message Waiting notification.
Setup DND for Station # :
Enter the number of the extension for which you wish to set up
Do Not Disturb.
66 Reference
SUPERSET x...x
The station in question is a SUPERSET telephone.
SUPERSET 7 Console
You are connected to a SUPERSET 7 console.
SUPERSET 700 Console
You are connected to a SUPERSET 700 console.
SUPERSET 7000 Console
You are connected to a SUPERSET 7000 console.
SC 1000 Console
You are connected to a SUPERCONSOLE 1000.
System is in Night Service 1
The call has been rerouted because the system is in
Night Service 1.
System is in Night Service 2
The call has been rerouted because the system is in
Night Service 2.
System Unable to Complete Selected Operation.
Please Try Again
The telephone system is not processing your request. Try again
later.
Toll Denial - Illegal Dialing
The caller dialed a toll number wrong, and the call has been
rerouted to your console.
Toll Denial - Route Restriction
The caller tried to dial a toll number not allowed in his/her Class
of Restriction and the call has been rerouted to your console.
Tone Timer Expired
You've been listening to busy or ringing tone for too long and the
system has disconnected your call. Cancel the call and try again.