Mitel SX-2000 Superconsole 2000 User Manual page 70

Guest Service
Part of the Hotel/Motel Feature package. This prompt appears in
several attendant mode operations. Pressing it places the console
in Guest Service mode immediately.
Headset or handset required for attendant operation
Plug in your headset or handset.
Holding Party Locked Out
You have left the caller on Key hold for too long, and the call is
returning to your console.
Hunt Group
Indicates that a station or trunk is a member of a hunt group.
In Auto-Answer Mode
The SUPERSET 4 telephone you have reached has activated
"Auto-Answer".
Interconnect Failure
There are local interconnect restrictions which do not allow you
to connect the requested devices.
Interconnect Restriction
The caller's extension is programmed with Interconnect Restriction.
Intercept Handling has rerouted the call to your console.
Internal
Indicates a call from inside your system.
Invalid Account Code
Verify your Account Code and try again.
Invalid Dialing
Verify what you dialed and try again.
Invalid Number
You attempted to dial an incorrect number. Verify your number
and try again.
64 Reference
Invalid Trunk Number
You attempted to select an incorrect or out-of-service trunk.
Language selection option not installed
The language you requested is not installed on your telephone
system.
Locked out
Indicates a station which is out of service and cannot be accessed
or make a call.
Modem
You are connected to a modem.
Modem Busy
The modem dialed is already busy.
Modem Call
Confirmation message when you dial a modem.
Modem Group
Indicates that the modem you are connected to is in a group of
modems.
Modem Out of Service
The modem dialed is out of service and cannot be used at this time.
Monitor Busy
The extension you are trying to monitor is already being monitored
from another station.
MSG Waiting
After pressing the [Check MSG Waiting] softkey, this indicates
that the extension has message(s) waiting.
MSG Waiting OFF
Confirmation that you turned off an extension's message waiting
indicator by pressing the [Clear MSG Waiting] softkey.