GEAppliances.com
Before replacing a burned-out
light bulb, the refrigerator
should be unplugged in order to avoid contact with a
live wire filament, (A burned-out
light bulb may break when being replaced,)
Turning the control to the OFF position does not remove power to the light circuit,
Dispenser
(on some models)
0
Unplug the refrigerator,
The bulb is located on the dispenser under
the control panel, Remove the light bulb by
turning it counterclockwise,
Replace the bulb with a bulb of the same
size and wattage,
Plug the refrigerator
back in,
I r
I
I Display
Refrigerator
Compartment
(on models with LED lighting)
Some models may have LED lighting display
If this assembly needs to be replaced, call GE
on the top and/or sides of the fresh food
Service at 1,800,432,2737 in the United States
compartment
and in the rear and side of the
or 1,800,561,3344 in Canada,
freezer compartment
21