Tools You Will Need; Mounting Space - GE PSA9120SF1SS Installation Manual

Installation Instructions
TOOLS YOU WILL NEED
# 1 and #2 Phillips Pencil
screwdriver
Tinsnips (for cutting
damper, if required)
Gloves
Safetygoggles
Scissors
(to cut template, if
necessary)
Saw (saber,hole or keyhole)
Ruleror tape measure
raight edge
Electric drill with VS', Y_G",
W' and s/8"drill bits
0
Studfinder or
I
Hammer(optional)
Level
Carpentersquare
(optional)
¢5b
Filler blocksor scrap
wood pieces,if needed
for top cabinet spacing
(usedon recessed
bottom cabinet
installations only)
Duct and maskingtape
MOUNTING SPACE
13" max.
66" or more
from the floor "{
to the top of
the oven
Bottom edge of _
i .........
cab net needsto be
_-_ _/ 30 or more from
3" [l:i the cooking surface
....... Backsplash
NOTES:
• The space between the cabinets must be 30" wide
and free of obstructions.
If the space between the cabinets is greater than
30", a Filler Panel Kit may be used to fill in the gap
between the oven and the cabinets. Your Owner's
Manual contains the kit number for your model.
This oven is for installation over ranges up to
36" wide.
If you are going to vent your oven to the outside,
see Hood Exhaust Section for exhaust duct
preparation.
• When installing the oven beneath smooth, flat
cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.
• Maximum cabinet depth above and beside the unit
is 13".
. For models with top venting holes: Do not allow
cabinetry or other objects to block the airflow of the
vent.
The product should not be installed over any
cooktop or range with a combined BTU greater
than 60000 BTU.