Gigabyte GA·7VRX User Manual page 75

4. Use the arrow keys to choose which drive contains the existing data to be copied.
5. Press [Enter] keys to selection and start duplication. The following progress screen will
appear.
Start to duplicate the image . . . Do you want to continue? (Yes/No)
Y - Continue
N - Abort
6. Select "Y" to continue. If you choose "N" , you will be returned to step 1.
7. Once complete, the following screen will appear confirming that your Security array has been
created. Press any key to reboot the system
8. Proceed to the Installing Driver chapter (see RAID Manual of the IUCD) to install the RAID driver
and/or operating system.
Array has been created.
<Press Any Key to Reboot>
77
Technical Reference