Using The Stopwatch - Sanyo KATANA User Manual

To stop the alarm:
Press any key to stop the alarm. (The alarm will stop and then sound
again after the selected snooze interval.)
Note:
In a no-service area , it's necessary to set the actual time and date to use the Alarm
Clock function after removing and installing your battery.

Using the Stopwatch

To start the stopwatch:
Select
To record a lap time while the stopwatch is running:
To display the stopwatch options:
1.
During stopwatch operation, press Options (right softkey).
2.
To select an option, highlight it and press
110 Section 2G: Using the Phone's Calendar and Tools
Press and hold the side camera key to cancel the snooze setting.
Press Dismiss (right softkey) to dismiss the alarm.
> Tools > Stop Watch.
Press Start (left softkey) to start the stopwatch.
Press Stop (left softkey) to stop the stopwatch.
Press Resume (left softkey) to restart the stopwatch.
Press Lap (right softkey) to record time of the first lap.
Press Lap (right softkey) again to record the next lap. (You may
continue this until lap 5.)
Go to Lap List to display a saved Lap List. Press Detail (left
softkey) to display the Lap List detail.
Save to Lap List to save the recorded lap times.
Reset to reset the time to zero and clear any recorded lap times.
.