Sony Reader PRS-T3 Series User Manual page 31

Reader™ User Guide
Getting started
Basic Operations
Adding/Getting Content
Browsing Content Lists
Reading
Organizing
Other Applications
Settings
Other Information
Contents list
Top page
Installing Reader application (Reader for PC/Mac)
1. Turn on your computer, connect your computer to the internet, and then connect the
Reader to your computer using the supplied USB cable.
Make sure you have administrator access to your computer.
2. When [Do you want the computer to recognize this device?] appears, tap [Yes]. See
Details.
3. To install on Windows computers:
From your computer, click on the "Start" menu
double-click the "SETUP" drive
To install on Mac computers:
When the Reader is connected to your Mac, the "SETUP" and "READER" drives will
appear on the desktop. Double-click the "SETUP" drive
Reader for Mac".
4. Follow the on-screen instructions to complete the installation of the Reader
application.
For details on purchasing content via Reader Store, transferring content to the
Reader and syncing, refer to the [Help] menu of the Reader application.
5. When transfer is complete, click "Disconnect" on the Reader application, and then
disconnect the USB cable from the Reader. After a short time, the [Home] screen
will appear.
Content will be sent to its corresponding application based on the file format of the
content.
Personal documents other than pictures files will be sent to the [Books] application.
Tip
When you transfer data to the microSD card, insert the microSD card to the Reader
in Step 2.
For details on the system requirements for the Reader application, see Details.
For details on supported file formats, see Details.
Copyright 2013 Sony Corporation
> Getting started > Installing Reader application (Reader for
PC/Mac) > Installing Reader application (Reader for PC/Mac)
double-click "Setup Reader for PC".
Search Find
Print
"Computer" or "My Computer"
double-click "Setup
Go to page top