Internal Connectors - Asus H170I-PLUS D3 User Manual

10. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
11. DisplayPort. This port connects a display monitor or a home-theater system.
DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
12.
output RGB Signal to CRT and isn't compatible with DVI-I.
Multi-VGA output supports up to three displays under Windows
displays under BIOS, and one display under DOS.
1.7.2

Internal connectors

1. Intel H170 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_3~6, SATAEXPRESS)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
H170 chipset.
H170I-PLUS D3 Intel
• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID].
Refer to section 2.6.3 PCH Storage Configuration for details.
• Before creating a RAID set, refer to the manual bundled in the motherboard support
DVD.
• The SATA EXPRESS connector can support one SATA Express device or two SATA
devices.
ASUS H170I-PLUS D3
Rapid Storage Technology through the onboard Intel
®
A
SATA6G_3
SATA6G_4
SATA6G_5
RSATA_TXP1
RSATA_TXN1
RSATA_RXN1
RSATA_RXP1
SATA6G_6
A RSATA_TXP2
RSATA_TXN2
RSATA_RXN2
B
RSATA_RXP2
SATA 6.0Gb/s connectors
®
OS environment, two
®
B
GND
GND
GND
GND
GND
GND
®
1-15