Magellan MiVue 5 series User Manual page 17

(1 min, 3 min, or 5 min).
- EV: Sets the proper exposure level (-1 ~ +1) to adjust the brightness of the image.
The default setting is 0.
- HDR: Select On or Off to enable or disable High Dynamic Range function of the
device.
- GPS Stamp: Sets if and how you want to record the GPS information.
ƒ G-Sensor Sensitivity: When enabled, the G sensor will prompt the recorder to start
recording automatically if an event happens.
Select Emergency or Parking Mode, and then change the sensitivity level of the G
sensor.
Please note that it is harder to trigger when you set the sensitivity level lower.
ƒ System: Allows you to change the system settings of the device.
- GPS Status: Displays the status of GPS signal reception (GPS enabled models).
- Date/Time: Sets the system date and time. For more information, see the "Setting
the date and time" section.
- Beep Alert: Enables or disables system notification sounds.
- Volume: Adjusts the volume level.
- LCD Standby: Select Always On or select how long (10 sec, 1 min, or 3 min) the
screen remains lit after you press any key.
- Language: Sets the language.
- Distance Unit: Sets the preferred distance unit.
- Storage Allocation: The system provides four default memory configurations to
store the videos (including continuous recording, event recording and parking
recording) and photos. Select the proper configuration based on your usage.
- Restore to Defaults: Restores system settings to factory defaults.
- Version: Displays the software information.
ƒ Format: Formats a memory card. (All data will be erased.)
15