Specifications; General Safety Rules - Makita 6952 Instruction Manual

SPECIFICATIONS

Capacities
No load speed (RPM)
Impacts per minute
Max. fastening torque
Dimensions (L x W x H)
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.

GENERAL SAFETY RULES

(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit.
Cluttered benches and dark areas invite acci-
dents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
2
Model
Machine screw
Standard bolt
High tensile bolt
Net weight
4 mm - 10 mm (5/32" - 3/8")
6 mm - 14 mm (1/4" - 9/16")
6 mm - 10 mm (1/4" - 3/8")
0 - 3,200/min.
120 N.m (89 ft.lbs)
229 mm x 67 mm x 180 mm (9" x 2-5/8" x 7-1/8")
1.3 kg (2.9 lbs)
3. Keep bystanders, children, and visitors
away while operating a power tool. Dis-
tractions can cause you to lose control.
Electrical Safety
4. Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized
outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it
6952
0 - 3,100
USA002-2