Advertisement
ABB-free@home
Parameter settings Sensor unit, 1gang
Sensor settings
Rocker settings
For pre-programmed devices the following parameter is available immediately. For all other devices it only becomes available
after being linked with an actuator. The setting in the list view is then made via the linking function of the Web-based user
interface of the System Access Point.
Parameter settings Sensor unit, 2gang
Sensor settings: As for 1gang; however, 2 rockers (left and right rocker) are displayed in the list view.
Rocker settings: As for 1gang; however, the settings can be made for 2 rockers (left and right rocker).
.
System Manual
®
[1]
Changing the name
[2]
Deleting the channel via 'X'
[3]
Selecting the rocker in the list view
[1]
Changing the name
[2]
Switching the sensor via the button
[3]
Setting the LED night/day switch-on brightness in % via the -/+ buttons:
This parameter can be used to specify how strong the LED lights per-
centage-wise at night/day.
Attention! The parameter only functions when a time profile with the
application "LED day/night switchover" is available. The device (channel)
must be linked with this application!
Application symbol:
[4]
Selecting the LED operating mode:
Light for orientation: LED lights permanent.
Status display: LED lights when actuated.
[5]
Selecting the function: Control element; dimming sensor; stairwell light
sensor; sensor force-position On/Off; blind sensor; blind force-position
05 Types of Devices
│41
Hide quick links:
Advertisement
