Panasonic CX600H series Operating Instructions Manual page 12

■
Installing / Removing batteries
Hook
Note the correct
polarity (+ or -)
12
English
Indicator / Control panel
● When pressing 4, 5, 6 buttons, the control panel
guide appears on the right side of the screen for 3
Pull open
seconds to highlight which button has been pressed.
Close
1 Remote control signal receiver
●
2 Ambient sensor
●
3 Power LED
●
4 Input mode selection
●
[Main Menu]
●
OK (when in the menu system)
5 Channel Up / Down
●
6 Volume Up / Down
●
7 Mains power On / Off switch
●
4
5
6
7
1 2 3
Rear side of the TV
Do not place any objects between the TV remote
control signal receiver and remote control.
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
Red: Standby
Green: On
Orange: Standby with some functions (recording,
etc.) active
The LED blinks when the TV receives a command
from the remote control.
Press repeatedly until you reach the desired mode.
Press and hold for about 3 seconds to display main
menu.
Cursor Up / Down (when in the menu system)
Cursor Left / Right (when in the menu system)
Use to switch the mains power.