Example System Configuration
MFS-2000 System Configuration
a)
Ethernet switch
Reference
b)
video signal
Material video signal
(camera/VTR etc.)
BVE-9100 Editing
Control System
a) It is recommended that the CTRL and DATA
LAN networks be configured by connecting
separate Ethernet switches for each LAN.
Depending on the type of Ethernet network,
a single Ethernet switch can perform
comparably to multiple switches.
For details, refer to the documentation of your
Ethernet switch.
14
Example System Configuration
a)
Ethernet switch
XGA compatible monitor
MFS-2000 Multi
Format Switcher
Processor
c)
Output video signal
(Main line output/REC
VTR/Monitor etc.)
VTR
DDR
b) Terminate with the supplied 75Ω
terminators. Terminators are supplied in the
product package.
c) This unit provides two output connectors for
each output. If you will be using only one of
the connectors, terminate the other with a 75
W terminator. Terminators are not supplied
with the unit.
d) The figure shows the MKS-2050.
MKS-2050/8050 Editing
d)
Keyboard
b)
Reference video signal
BKS-R Series
HDS-X Series
DCU-8000 Device Control Unit Pack
MKS-2010/2015/
2017 Control Unit
Reference video
b)
signal
Cross cable
Cable with BNC
connectors