Connections
Using the device as a remote control
You can turn the TV on or off, browse channels, or adjust the volume level on the TV using the
device as a remote control.
1
On the device, tap → Continue.
2
Select the TV brand.
3
Ensure that the device's infrared port is facing the TV and tap . Then, tap Yes, this code
1 works if the device turns off the TV.
If the device does not turn off the TV, tap Send this code 1 again or No, test next code 2,
and then repeat this until the TV recognises the signal.
4
Select a channel source.
5
When the setup is completed, tap .
Turn the TV on or o .
TV control menus
Access additional options.
Additional functions
179