Cadillac SRX Owner's Manual page 76

Voice Recognition
The navigation system's voice recognition allows for
hands-free operation of navigation and audio system
features. Voice recognition can be used when the
ignition is in on or when Retained Accessory
Power (RAP) is active.
This feature only works if the map DVD is inserted and
I AGREE has been selected. If you try to use voice
recognition without the map DVD inserted, the system
will display "Please insert the navigation map DVD
to use the voice recognition feature."
To use navigation voice recognition, do the following:
2. Clearly state one of the commands listed on the
following pages. For example, say "FM1".
3. The system will tell you the command being
implemented. For example, the system will
say "FM1 Radio" and change the audio system to
the FM1 source.
4-2
1. Press the talk symbol
steering wheel control
and release it when
you hear a beep. The
audio system, if on,
will mute.
You can end voice recognition by not speaking any
commands. After about five seconds of silence,
the system will automatically cancel voice recognition.
At times, the system may not understand a spoken
command. If this happens, try again. If a spoken
command is not available, the system will provide
feedback based on availability.
While using voice recognition, make sure to keep
interior noise levels to a minimum. Otherwise, the
system might not recognize voice commands.
The system will only recognize commands spoken
in English.
Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. To use the voice commands, refer
to the instructions listed previously.
Help Commands
These commands are universal and will enable you to
use the help prompts available from the system.
Map Help: This command will enable the system to
provide the available commands for the map screen.