Sceptre E405BD-FMQR User Manual page 7

E405 series
Table of Contents

Advertisement

TV/DVD Remote Description
POWER – Turns the TV on or off.
1.
INFO – Shows the display info.
2.
FREEZE – Press this button to freeze the picture on the screen.
3.
SLEEP – Turns the TV off in a specific set of time dependent on your selection.
4.
CC – Cycles between different closed captioning modes.
5.
MTS – Selects stereo, mono, or second audio programming.
6.
FAVORITE – Gives you, the favorite channels list.
7.
ADD/DEL – This button adds or deletes a channel from the favorite channels list.
8.
NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you are watching TV. For switching
9.
DVD chapters over 100 the 0 button acts as the 100 button, so press the 0 button twice to get that chapter.
10.
(-)– Inserts the dash for selecting digital channels directly.
R – Returns to the previous channel. For switching DVD chapters over 100 the R button acts as the 100+ button, so
11.
press the R button and the number you want to switch to. For example for chapter 125 you would press R and 2
and 5 for the combination of 125.
PICTURE – Selects various preset picture settings.
12.
SOUND – Selects various preset sound settings.
13.
VOL(+) / VOL(-) – Press the VOL buttons to increase or decrease the sound level.
14.
CH(+)/CH(-) – Press the CH buttons to go through the channel list.
15.
MUTE – Turns the sound off from the TV. To unmute either press VOL(+) or press the MUTE button again.
16.
ASPECT – Selects different viewing modes of the TV.
17.
GUIDE – Opens the current digital channel information guide (antenna only).
18.
MENU – Brings up the main TV menu on the screen.
19.
▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the TV's menu and the DVD's menu.
20.
Press the ENTER button when you want to select a particular option.
SOURCE – Press this button to cycle through the INPUT source.
21.
EXIT – Exit the main TV menu on the screen.
22.
AUTO EJECT – Press this button to open or close the DVD player.
23.
D.MENU – Shows the menu of the DVD disc.
24.
DVD – Press this button to go to the DVD source.
25.
►/║ – Play/pause button in DVD mode.
26.
■ – Stop button in DVD mode.
27.
REPEAT – Press this button for repeat the program.
28.
AB – Press this button for repeat play point A and B
29.
PREVIOUS CHAPTER – Press this button to select the DVD's previous chapter.
30.
REWIND – Press this button to reverse the DVD movie to a previous scene.
31.
FAST FOWARD – Press this button to fast forward the DVD to the next scene.
32.
NEXT CHAPTER – Press this button to select the DVD movie's next chapter.
33.
D.SETUP – Press this button to setup the disc in DVD mode.
34.
TITLE – Press this button to go to the title menu if the DVD you're watching has a title page.
35.
SUBTITLE – Displays the subtitle.
36.
AUDIO – Press to select TV sound option.
37.
The following buttons are functions designed to work with the optional, Sceptre Sound Bar.
POWER – This button turns on the sound bar.
1.
SOURCE – This button selects the sound bar's source.
2.
MODE – This button selects the sound bar's sound modes.
3.
VOL(-) – This button decreases the volume of the sound bar.
4.
VOL(+) – This button increases the volume of the sound bar.
5.
Please Note:
To insert, eject a disc from the DVD player, to use any functions on the DVD you must press the DVD
button first.
This display does not support QAM function. You need to have a digital cable box in order to receive
cable channels.
The remote picture might be different from the actual remote. Please refer to the user manual on our
website
http://www.sceptre.com
(DVD) FMQR Series P7

Advertisement

Table of Contents
loading

Table of Contents