Camera Settings - Nokia N85 User Manual

To immediately play the video clip you just
●
recorded, select Play
If you do not want to keep the video, select
●
Delete ( ).
To send the video clip using a multimedia
●
message, e-mail, or other connection methods,
such as Bluetooth connectivity, press the call key,
or select Send ( ). See "Write and send
messages", p. 112. See "Send data using
Bluetooth connectivity", p. 41.
available during a call. You may not be able to
send video clips saved in the MPEG-4 file format
in a multimedia message.
You can also send the video clip to a person you
are talking to. Select Send to caller
available during a call).
To add the video clip to an album, select
●
album
To view information about the video clip, select
●
Details
To upload the video clip to a compatible online
●
album, select (only available if you have set up
an account for a compatible online album).
Share images and videos online ", p. 93.
To return to the viewfinder to record a new video
●
clip, press the capture key.
( ).
This option is not
( ) (only
Add to
See "

Camera settings

There are two kinds of settings for the camera:
setup settings and main settings. The setup settings
return to the default settings after you close the
camera, but the main settings remain the same
until you change them again. To adjust the setup
settings, use the options in the active toolbar.
"Colour and lighting settings", p. 84.
the main settings, in the image or video mode,
select Options > Settings.
Still image camera settings
To change the main settings, in the image mode,
select Options Settings
>
Image quality — Set the resolution (main
●
camera only). The better the image quality, the
more memory the image consumes.
Add to album — Save the image to an album in
●
Photos.
Record location — To add GPS location
●
coordinates to each image file, select On.
Receiving a GPS signal may take time or the signal
may not be available.
Show captured image
●
view the captured image after it is taken or to
continue image capturing immediately.
Default image name
●
name for the captured images.
See
To change
and from the following:
— Select whether to
— Define the default
83