Change Your Router Ip Address - TRENDnet TEW-721BRM User Manual

TRENDnet User's Guide
CIP
If you select CIP mode, the screen below is displayed.
 State of Connection: Select whether to enable or disable this connection.
 IP Protocol Version: Select the IP protocol version.
 Name: Enter your desired connection name.
 NAT: Select whether to enable or disable NAT (Network Address Translation).
Enable this setting to share one WAN IP address with multiple computers on your
network.
 External IP Address: Enter the IP address provided by your ISP.
 Subnet Mask: Enter the subnet mask provided by your ISP.
 Default Gateway: Enter the default gateway provided by your ISP.
 DNS Enabled: Select whether to enable or disable DNS (Domain Name System).
 DNS Override Allowed: Select whether to enable or disable DNS override.
 DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
© Copyright 2014 TRENDnet. All Rights Reserved.
 As system default route: Check this box to set the current setting as the default
route.
 ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
 Proxy ARP Enable: Check this box to enable proxy ARP function.

Change your router IP address

Setup > Local Network
In most cases, you do not need to change your router IP address settings. Typically, the
router IP address settings only needs to be changed, if you plan to use another router in
your network with the same IP address settings, if you are connecting your router to an
existing network that is already using the IP address settings your router is using, or if
you are experiencing problems establishing VPN connections to your office network
through your router.
Note: If you are not encountering any issues or are not faced with one of the cases
described above or similar, it is recommended to keep your router IP address settings as
default.
Default Router IP Address: 192.168.10.1
Default Router Network: 192.168.10.0 / 255.255.255.0
1. Log into your router management page (see "Access your router management page"
on page 22).
2. Click on Setup, and click on Local Network.
3. Review the settings and click Apply to save changes.
 LAN IP Address: Enter the new router IP address. (e.g. 192.168.200.1)
TEW-721BRM
28