Installation Guide & Wiring Diagram - Prestige Pro Line Model Hoods Installation Instructions Manual

INSTALLATION GUIDE & WIRING DIAGRAM
1.) Remove shipping bracket from hood. DO NOT DISCARD SCREWS.
2.) Install blower bracket with the screws removed from the shipping bracket.
3.) Locate the terminal block inside the electrical supply box.
4.) Connect Fan #1 wire (RED) to terminal block #4.
5.) Connect Fan #1 wire (BLACK) to terminal block #6.
6.) Connect the 115 volt supply wire (WHITE) to terminal block #2.
7.) Connect the 115 volt supply wire (BLACK) to terminal block #1.
Installation of Internal Blower Kit (IBPL1200 1200CFM)
1.) Remove shipping bracket from hood. DO NOT DISCARD SCREWS.
2.) Install blower bracket with the screws removed from the shipping bracket.
3.) Locate the terminal block inside the electrical supply box.
4.) Connect Fan #1 wire (RED) to terminal block #4.
5.) Connect Fan #1 wire (BLACK) to terminal block #6.
6.) Connect the 115 volt supply wire (WHITE) to terminal block #2.
7.) Connect the 115 volt supply wire (BLACK) to terminal block #1.
8.) Connect Fan # 2 wire (RED) to terminal block #3.
9.) Connect Fan # 2 wire (BLACK) to terminal block #5.
Installation of Internal Blower Kit (IBPL600 600CFM)
FOR FAN # 1
FOR FAN # 2
- 8 -