Setting Oven Lockout Feature; Options - LG LRE30453SW Owner's Manual

SETTING OVEN & COOKTOP
LOCKOUT FEATURE
The START pad controls the Oven & Cooktop Lockout feature.
The Oven & Cooktop Lockout feature automatically locks the
oven door, prevents the cooktop element and most oven
controls from being turned ON. It does not disable the clock,
timer or the interior oven light.
To activate the Oven Lockout feature:
1. Press and hold START for
3 seconds.
2. 2 beeps will sound, DOOR
LOCKED will flash in the display.
Once the oven door is locked the
DOOR LOCKED indicator will stop
flashing and remain on along with
the lock icon(
To reactivate normal oven operation:
1. Press and hold START for 3
seconds. A beep will sound
2 times. The DOOR LOCKED will
continue to flash until the oven
door has completely unlocked and
the lock icon(
2. The oven is again fully operational.
CHANGING HOUR MODE ON
CLOCK (12hr, 24hr)
Your control is set to use a 12-hour clock. If you would prefer
to have a 24-hour time clock, follow the steps below.
Changing between 12 or 24 hour time of day
1. Press and hold COOK & WARM
pad for 3 seconds. OPt will be
displayed.
2. Press 1. The display will show CLO
12H.
3. Press 1 to switch between the
12H and 24H.
4. Press START to accept the desired
change.
OPERATION (OPTIONS)
SETTING TEMPERATURE UNIT —
FAHRENHEIT OR CENTIGRADE
COOK & WARM pad control the Fahrenheit or Centigrade
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to
display in Fahrenheit.
To change display from Fahrenheit to Centigrade or
Centigrade to Fahrenheit:
) light.
SETTING BEEPER VOLUME
The beeper volume feature allows you to adjust the volumes
) light will clear.
to a more acceptable volume. There are three possible
volume levels.
To set beeper volume
- 16 -
1. Press COOK & WARM for 3
seconds.
2. Press 2. The display will show
Unit F.
3. Press 2 to switch between the F
and C.
4. Press START to accept the
desired change.
1. Press COOK & WARM for 3
seconds.
2. Press 3. The display will show
BEEP Hi.
3. Press 3 to switch beeper volume
( Hi, Lo, and OFF ).
4. Press START to accept the
desired change.