Unpairing From A Bluetooth Device; Receiving Files Using Bluetooth - HTC Desire 626 User Manual

160 Wireless sharing
Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC Desire 626, and
then turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. Tap the headset's name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in
device on page 160, and then follow the steps under

Unpairing from a Bluetooth device

1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. In the Paired devices section, tap
3. Tap Unpair.

Receiving files using Bluetooth

HTC Desire 626 lets you receive various files with Bluetooth, including photos, music tracks,
contact info, calendar events, and documents such as PDFs.
Refer to the device's documentation for instructions on sending information over Bluetooth.
1. Turn Bluetooth on.
See Turning Bluetooth on or off
2. On the sending device, send one or more files to HTC Desire 626.
3. If asked, accept the pairing request on HTC Desire 626 and on the sending device. You may
also be prompted to enter the same passcode or confirm the auto-generated passcode on
both devices.
You'll then get a Bluetooth authorization request.
4. Tap Pair.
5. When HTC Desire 626 receives a file transfer request notification, slide the Notifications
panel down, tap the incoming file notification, and then tap Accept.
on page 159.
Connecting a Bluetooth headset
on page 159.
next to the device to unpair.
on page 159.
Unpairing from a Bluetooth
on page 159.