Advertisement
E N G L I S H
Removing
Make sure that the handle (14) is vertical.
Keep the release pedal (3) depressed.
Pull the handle vertically out of the mounting
slots.
Fitting and removing accessories (fig. D & E)
This appliance is supplied with the following
accessories:
- a flexible connecting hose (17)
- a crevice tool (18) for confined spaces
- a hard brush (19) for furniture and stairs
Fitting
Take the appropriate accessories from the
appliance.
Lift the accessory inlet cover (6) to reveal the
accessory inlet.
Insert the flat end (20) of the connecting hose
into the inlet.
Attach the other end of the hose to the
accessory.
Removing
Keep the clips (21) on the flat end of the hose
depressed.
Pull the hose out of the accessory inlet.
Pull the accessory off the hose.
Push the accessories into their respective
holders (9) until they click into place.
USE
Switching on and off (fig. F)
The appliance can be operated using either the
foot-operated on/off switch (1) or the hand-
operated on/off switch (2).
Cleaning hard floors or cleaning using accessories
Press the on/off switch once to switch the
appliance on.
The mode indicator light (4) with the symbol
will light up.
Press the on/off switch twice to switch the
appliance off.
8
FV5501UK.P65
Cleaning carpets and rugs
Press the on/off switch twice to switch the
appliance and the brush roller on.
The mode indicator light (4) with the symbol
Press the on/off switch once to switch the
appliance off.
Storing the cord (fig. G)
Set the hook (26) to the up position (A).
Wind the cord around the hook (26) and the
two screw-in hooks (12).
To remove the cord:
Set the hook (26) to the down position (B) to
release the cord.
Emptying the dust bowl (fig. H & I)
Make sure that the accessory inlet cover (6) is
closed.
Lift the dust bowl (5) from the appliance.
Take the filter unit (22) off the dust bowl.
Empty the dust bowl.
Fit the filter unit back onto the dust bowl.
Fit the dust bowl into the appliance. Make sure
it clicks into position.
Cleaning
Regularly wipe the appliance with a damp
cloth. Do not use any abrasive or solvent-
based cleaner. Do not immerse the appliance
in water.
Cleaning the dust bowl and filters (fig. H & I)
The filters are reusable and should be cleaned
regularly.
Make sure that the accessory inlet cover (6) is
closed.
Lift the dust bowl (5) from the appliance.
Take the filter unit (22) off the dust bowl.
Empty the dust bowl and clean it using a soft
brush or a damp cloth. Do not use any
abrasive or solvent-based cleaner.
8
will light up.
CLEANING AND MAINTENANCE
Before cleaning and maintenance,
switch the appliance off and unplug it.
9/25/01, 16:38
Advertisement
