Call Forward - Toshiba CIX series User Training Reference

CALL FORWARD

There are two types of Call Forwarding that you can set. One is System Call Forward
(set in system Programming) which automatically directs calls to a predefined location,
such as Voice Mail. The other type is Station Call Forwarding. You can use Station
Call Forwarding to replace your System CF destination with a custom CF setting made
from your station.
System Call Forward directs calls to a destination preset by an Administrator for
each telephone, commonly set to voice mail.
To turn on System Call Forward for your telephone, press #620. Confirmation
tone (three short tones) and "DATA PROGRAMMED" indicate the data is
set.
To turn off System Call Forward for your telephone, press #621. Confirmation
tone (three short tones) and "DATA PROGRAMMED" indicate the data is
set.
Station Call Forward enables you to assign Call Forward destinations for each
extension on your telephone that will override the telephone's System CF settings.
Each extension can be independently set Station Call Forward to a unique
destination.
The following calls to your station can be forwarded:
Internal calls
Auto Attendant calls
Outside lines that ring only your station
Transferred internal or incoming line calls
Call Forward Settings
Call Forward All Calls Forwards all calls immediately.
Call Forward Busy/Do Not Disturb Forwards calls immediately when your extension is
Call Forward - No Answer Forwards all calls to your station whenever you do
Call Forward Busy/Do Not
Disturb/No Answer
Call Forward Cancel Cancels the set Call Forward feature. Notice that
busy or in Do Not Disturb (DND) mode.
not answer the call within a designated time (set by
you when you enable the feature).
Forwards all calls to your station whenever you are
busy, in the DND mode, or after ringing and you do
not answer the call within a designated time (set by
you when you enable the feature).
each category of Call Forward has a different code
for canceling.