Rear - Sony KDL-26M3000 Operating Instructions Manual

Rear
l
~
. .
~ -
[OJ
SERVI E
ONL:
11-H----~__t
8
•
VHF/UHFI
CABLE
Item Description
@]
HDMIIN 1/2
R-AUDIO-L
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment, such
as DVD player, a set-top box, AN receiver and Blu-ray disc player as well as Pc. HDMI
supports enhanced or high definition video plus digital audio.
b
• If the equipment has a DVI and not a HDMI connector, use a HDMI to DVI cable or adapter
to connect the DVI output to either HDMI IN 1 or HDMI IN 2 input, and connect the audio
jacks to the AUDIO (LIR) jacks below the HDMI IN 2. (DVI connector is for video signals
only, the Audio jacks provide support for the audio.)
HDMI-to-DVI cable
~
....[Ji
HDMI-to-DVI adapter Audio cable
14
VIDEO IN 1
S VIDEO
VIDEO IN 1/3
VIDEOI
L(MONO)-
AUDIO-R
b
• For better PC view, use the PC IN (ROB IN) input.
• HDMI connection is necessary to view 480i, 480p, nop, and 1080i formats. Note that this
TV displays all video input signals in a resolution of 1,366 dots x 768 lines.
Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than composite video
([ID).
S VIDEO
does not provide sound, you need to connect the audio cables.
Connect to the composite video and audio output jacks on your AN equipment such as a VCR
or other video equipment. A third composite video and audio (VIDEO IN 2) input is located
on the left side panel of the TV.