Select A Safe Power Supply; Moving The Machine - Canon imageRUNNER 2202N Quick Manual

• Avoid exposing the
machine to rapid changes in
temperature.
If the room in which the
machine is installed is cold
but rapidly heated, water
droplets (condensation) may
form inside the machine. This
may result in a noticeable
degradation in the quality of
the copied image, the inability
to properly scan an original, or the copies having no
printed image at all.
• Avoid installing the machine near computers or other
precision electronic equipment.
Electrical interference and vibrations generated by
the machine during printing can adversely affect the
operation of such equipment.
• Avoid installing the machine near televisions, radios,
or similar electronic equipment.
The machine might interfere with sound and picture
signal reception.
Insert the power plug into a dedicated power outlet,
and maintain as much space as possible between the
machine and other electronic equipment.
• Avoid installing the machine at high altitudes of about
3,000 meters above sea level, or higher.
Machines with a hard disk may not operate properly
when used at high altitudes of about 3,000 meters
above sea level, or higher.

Select a Safe Power Supply

• Plug the machine into a 220 - 240 V AC outlet.
• Make sure that the power supply for the machine is
safe, and has a steady voltage.
• Do not connect other electrical equipment to
the same power outlet to which the machine is
connected.
• Do not connect the power cord to a multiplug power
strip, as this may cause a fire or electrical shock.
• The power cord may become damaged if it is stepped
on, affixed with staples, or if heavy objects are placed
on it. Continued use of a damaged power cord can
lead to an accident, such as a fire or electrical shock.
• The power cord should not be taut, as this may lead
to a loose connection and cause overheating, which
could result in a fire.
• If excessive stress is applied to the connection part of
the power cord, it may damage the power cord or the
wires inside the machine may disconnect. This could
result in a fire. Avoid the following situations:
- Connecting and disconnecting the power cord
frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part,
and continuous stress is being applied to the power
outlet or the connection part.
- Applying excessive force on the power plug.

Moving the Machine

• If you intend to move
the machine, even to
a location on the same
floor of your building,
contact your local
authorized Canon dealer
beforehand. Do not
attempt to move the
machine yourself.
Installation Location and Handling
09