ASROCK H170 Pro4/D3 User Manual page 51

and assign the appropriate frequency automatically.
DRAM Frequency OC Preset
If the DRAM frequency is selected, the corresponding DRAM and BCLK frequency for
overclocking will be set.
Primary Timing
CAS# Latency (tCL)
he time between sending a column address to the memory and the beginning of the data
in response.
RAS# to CAS# Delay and Row Precharge (tRCDtRP) O
RAS# to CAS# Delay : he number of clock cycles required between the opening of
a row of memory and accessing columns within it.
Row Precharge: he number of clock cycles required between the issuing of the
precharge command and opening the next row.
RAS# Active Time (tRAS)
he number of clock cycles required between a bank active command and issuing the
precharge command.
Command Rate (CR)
he delay between when a memory chip is selected and when the irst active command can
be issued.
Secondary Timing
Write Recovery Time (tWR)
he amount of delay that must elapse ater the completion of a valid write operation,
before an active bank can be precharged.
Refresh Cycle Time (tRFC)
he number of clocks from a Refresh command until the irst Activate command to
the same rank.
RAS to RAS Delay (tRRD_L)
he number of clocks between two rows activated in diferent banks of the same
rank.
46