ASROCK H170 Pro4/D3 User Manual page 45

Step 5
Select where to save the ISO ile by pressing the red circle as shown as the picture below.
Step 6
If you want to burn the patched image to a CD, please check "Burn Image" and select "Target
Device to Burn". If not, the patched ISO image will be exported to the destination selected
in Step5. hen Press "Start" to proceed.
Step 7
Now you are able to install Windows® 7 on Braswell or Skylake with the new burned CD.
Or please use the patched ISO image to make an OS USB drive to install the OS.
40