Table of Contents
Advertisement
670 MAINTAINING YOUR VEHICLE
License Lamp
The license plate lamp is located under the tailgate light
bar and above the license plate.
1. Using a small screwdriver, press inward the locking
tab on the outboard side of the lamp assembly and
pull down on the lamp assembly for removal.
FLUID CAPACITIES
Fuel (Approximate)
Engine Oil with Filter
3.6L Engine (SAE 5W-20, API Certified).
Cooling System *
3.6L Engine (MOPAR Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula or
equivalent) meeting the requirements of FCA Material Standard MS.90032.
* Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Quarts (2.8 Liters) if equipped with a
rear heater.
2. Twist and remove the socket from the lamp assembly
and pull the bulb out to remove.
3. Push the bulb into the socket, twist the socket into the
lamp assembly and reinstall the lamp assembly into
place ensuring the locking tab is secure.
I n f o r ma t i o n P r o v i d e d b y :
U.S.
Metric
20 Gallons
76 Liters
6 Quarts
5.6 Liters
13.4 Quarts
12.6 Liters
Advertisement
Table of Contents
