Related Manuals for Makita 9060DBL
Summary of Contents for Makita 9060DBL
- Page 1 Angle Sander MODEL 9060DBL I N S T R U C T I O N WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. DOUBLE INSULATION M A N U A L 001015...
-
Page 2: Specifications
3. Keep bystanders, children, and visitors away while operating a power tool. Distrac- tions can cause you to lose control. 9060DBL 6,000/min 458 mm (18”) 4.2 kg (9.3 lbs) 5/8”... - Page 3 5. Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
-
Page 4: Specific Safety Rules
24. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. - Page 5 9. Make sure the abrasive disc or the wheel is not contacting the workpiece before the switch is turned on. 10. Watch out for flying sparks. Hold the tool so that sparks fly away from you and other persons or flammable materials. 11.
-
Page 6: Functional Description
FUNCTIONAL DESCRIPTION 001026 1. Shaft lock 001041 1. Switch trigger 2. Lock lever ASSEMBLY 001057 CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock CAUTION: • Never actuate the shaft lock when the spindle is moving. - Page 7 001112 1. Lock nut 2. Abrasive disc 3. Rubber pad 001089 1. Lock nut wrench 2. Shaft lock Installing or removing abrasive disc (optional accessory) NOTE: • Use sander accessories specified in this manual. These must be purchased separately. Mount the rubber pad onto the spindle. Fit the disc on the rubber pad and screw the lock nut onto the spindle.
- Page 8 001064 1. Wheel guard 2. Bearing box 3. Screw 001076 1. Lock nut 2. Depressed center grinding wheel/ Multi-disc 3. Inner flange 001089 1. Lock nut wrench 2. Shaft lock Installing or removing wheel guard CAUTION: • When using a depressed center grinding wheel/Multi- disc, flex wheel or wire wheel brush, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator.
-
Page 9: Operation
001101 1. Lock nut 2. Flex wheel 3. Plastic pad 4. Inner flange 001089 1. Lock nut wrench 2. Shaft lock OPERATION 001130 15˚ Installing or removing flex wheel (optional accessory) WARNING: • Always use specific guard when depressed center grinding wheel/Multi-disc is on tool. - Page 10 001141 1. Wire cup brush 2. Urethane washer 001234 1. Wire wheel brush ALWAYS hold the tool firmly with one hand on rear handle and the other on the side handle. Turn the tool on and then apply the wheel or disc to the workpiece. In general, keep the edge of the wheel or disc at an angle of about 15 degrees to the workpiece surface.
-
Page 11: Maintenance
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. - Page 12 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 13 9060DBL Grip 36 Wheel guard Inner flange 89 Depressed center grinding wheel/Multi-disc Lock nut 5/8-40 Plastic pad Flex wheel Rubber pad 170 Abrasive disc Sanding lock nut 5/8-48 Wire wheel brush Urethane washer 14 Wire cup brush Lock nut wrench 28 Accessory kit 7”...
- Page 14 Memo...
- Page 15 Memo...
- Page 16 WARRANTY. “The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools. No dealer or his agent or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement.”...