Download Print this page

Makita 5016N8 Instruction Manual page 22

340 mm (13-3/8") and 375 mm (14-3/4")

Advertisement

MAKllA L I M I T E D ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to
be free of defects from workmanship and materials for the period of ONE YEAR from the date of
original purchase. Should any trouble develop during this one-yeax period, return the COMPLETE
tool, freight prepaid, to one of Malcita's Factory or Authorized Service Centers. If inspection
shows
the trouble is caused by defective workmanship or material, Makita
will
repair (or at our option,
replace) without charge.
This
Warranty does not apply where:
repam have been
made
or attempted by others:
repam are required because of normal wear and tear
The tool has been abused. misused or Improperly mamtruned.
. .
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCLDENTAL OR CON-
SEOIJENTIAL DAMAGES FROM THE SALE OR USE O F THE PRODUCT. THIS DISCLAIMER
APFLIEs
BOTH DURING AND
AFTER THE TERM OF THIS WARRANTY.
MAKlTA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES OF "MERCHANTABILITY" AND "FITNESS FOR A SPECIFIC PURPOSE,"
AFTER THE ONE-YEAR TERM O F
THIS
WARRANTY.
This Warranty gives you specific legal
rights,
and you may
also
have other
rights
which vary from
state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages,
so
the above limitation or exclusion may not apply t o you. Some states do not allow
limitation on how long an implied warranty lasts,
so
the above limitation may not apply to you.
Makita Corporation
3-11-8,
Surniyoshi-cho,
Anjo, Aichi
446
Japan
883465
-
061
PRINTED IN JAPAN
1991
-
11
-
N

Advertisement

loading

This manual is also suitable for:

5014nb