Using The Eki 830; Connecting Headphones Or An Induction Coupler - Sennheiser EKI 830 Instruction Manual

Using the EKI 830

Using the EKI 830

Connecting headphones or an induction coupler

The 3.5 mm jack socket of the receiver allows you to connect
• headphones such as the Sennheiser HD 410/1029, PX 90,
PMX 60/90, GP 03,
• an induction coupler such as the Sennheiser EZT 3011 induction loop
or the EZI 120 induction plates or
• a connection cable with 3.5 mm jack plug to your hearing aid.
Connecting headphones
Connect the 3.5 mm jack plug of the headphones to the socket of the
receiver.
Connecting the induction loop
Carefully remove the clip from the receiver.
Attach the clip of the induction loop as shown.
Connect the 3.5 mm jack plug of the induction loop to the socket of
the receiver.
8 | EKI 830