Linksys WUSB54GSC User Manual page 11

Chapter 3
WEP
If the network has WEP encryption enabled, then you see
the WEP Key Needed for Connection screen.
WEP Security
WEP Select 64-bit or 128-bit encryption.
Passphrase
Enter the network's Passphrase, so a
WEP key is automatically generated. The passphrase is
case-sensitive and must be 16 or fewer alphanumeric
characters. It must match the passphrase of your other
wireless network devices and is compatible with Linksys
wireless products only. (For non-Linksys wireless products,
enter the WEP key manually.)
WEP Key 1
If you do not have the Passphrase, enter
the WEP key, which must match the WEP key of your
wireless network. For 64-bit encryption, enter exactly 10
hexadecimal characters ("0" to "9" and "A" to "F".) For 128 -bit
encryption, enter exactly 26 hexadecimal characters.
Click Connect and proceed to step 3.
WPA Personal
If the network has WPA Personal security enabled, then
you see the WPA Personal Needed for Connection screen.
WPA-Personal Security
Compact Wireless-G USB Network Adapter with SpeedBooster
Encryption Select the type of algorithm you want to use,
TKIP or AES.
Passphrase
Enter the network's Passphrase (Pre-shared
Key) of 8-63 characters.
Click Connect and proceed to step 3.
WPA2 Personal
If the network has WPA2 Personal security enabled, then
you see the WPA2 Personal Needed for Connection screen.
WPA2-Personal Security
Passphrase Enter the network's Passphrase (Pre-shared
Key) of 8-63 characters.
Click Connect and proceed to step 3.
3. After the profile installs, the
appears. Click Finish.
Congratulations
Congratulations! The profile is
successfully configured.
Configuration
Congratulations screen
8