Bbq Grill (If So Equipped) - Jayco 2016 North Point User Manual

JAYCO TOWABLE
Do not use the oven as a storage area.
For additional information refer to the manufacturer's owners' manual included in the
warranty packet.
Do not cover the oven vent openings while the oven is in operation. Restricting the
flow of combustion air will create an asphyxiation hazard.
BBQ G (I
RILL F
Make sure that you read, understand and follow all information supplied with your
RV about propane before operating the BBQ grill. The propane hose must be
correctly connected before lighting the grill. Failure to follow instructions supplied by
the grill manufacturer with your RV or to use any other components than those
originally supplied with the grill could lead to death or serious injury from fire or
explosion.
The maximum weight limit for the bracket on the side of your motor home is 50 lbs.
This limit includes the weight placed on the BBQ gill. Exceeding this weight limit
could cause damage to the unit and possibly cause personal injury from hot
.
equipment
The BBQ grill is for use outside of the motor home. Never use this grill inside a
compartment or the recreation vehicle. Before operating the BBQ grill, make sure that it
is securely placed on the support bracket. The grill must be COMPLETELY cooled before
storing to avoid damaging the carrying case (if so equipped) and causing injury from
handling the grill when it is hot. Wait until the grill is completely cooled, then store it.
Bumper mount grill set-up (if so equipped)
Insert the grill mounting bar into the bracket (mounting tube) on the rear bumper of the
recreation vehicle. Insert the pin through the hole in the bracket and mounting bar. The
pin must be installed to insure the mounting bar is secure during use. Set the BBQ grill on
the mounting bar by inserting the (2) pegs on the bar into the grill mounting bracket. Make
sure the mounting bar and the grill are securely in place before proceeding with the
propane connection.
Attaching the "quick coupler" connection
The "quick coupler" is directly connected to the RV propane system. The "quick-coupler"
connection has a positive shut-off valve as required by code and standards.
1. Place the "quick coupler handle in the OFF position and push back the sleeve. The
valve handle must be OFF to make the connection.
2. Insert the plug and release the sleeve.
3. Push the plug until the sleeve snaps forward, locking the plug into the socket.
4. Turn the handle ON to allow propane to flow to the drop in stove.
S E )
O QUIPPED
WARNING
WARNING
SECTION 10-APPLIANCES
WARNING
10-2