Bbq Grill (If So Equipped) - Jayco 2016 Jay Series Owner's Manual

Camping trailers
Hide thumbs Also See for 2016 Jay Series:
Table of Contents

Advertisement

STARCRAFT CAMPING TRAILERS
BBQ G
(I
S
RILL
F
Make sure that you read, understand and follow all information supplied with
your RV about propane before operating the BBQ grill. The propane hose
must be correctly connected before lighting the grill. Failure to follow
instructions supplied by the grill manufacturer with your RV or to use any
other components than those originally supplied with the grill could lead to
death or serious injury from fire or explosion.
The maximum weight limit for the bracket on the side of your trailer is 50 lbs.
This limit includes the weight placed on the BBQ gill. Exceeding this weight
limit could cause damage to the unit and possibly cause personal injury from
hot equipment.
The BBQ grill is for use outside the
RV.
Never use this grill inside a
compartment or the RV.
operating the BBQ grill, make sure
that it is securely placed on the
support bracket.
The
BBQ
grill
COMPLETELY
storing
to
avoid
carrying case (if so equipped) and
causing injury from handling the grill
when it is hot. Wait until the grill is
completely cool, then store it.
Setting up the grill (bumper mount grill only – if so equipped)
Insert the grill mounting bar into the bracket (mounting tube) on the rear bumper of
the RV. Insert the pin through the hole in the bracket and mounting bar. The pin
must be installed to insure the mounting bar is secure during use. Set the BBQ
grill on the mounting bar by inserting the (2) pegs on the bar into the grill mounting
bracket. Make sure the mounting bar and the grill are securely in place before
proceeding with the propane connection.
Attaching the "quick coupler" connection
The "quick coupler" is directly connected to the RV propane system.
The "quick-coupler" connection has a positive shut-off valve as required by code
and standards.
1.
Place the "quick coupler handle in the OFF position and push back the
sleeve. The valve handle must be OFF to make the connection.
2.
Insert the plug and release the sleeve.
3.
Push the plug until the sleeve snaps forward, locking the plug into the socket.
4.
Turn the handle ON to allow propane to flow to the drop in stove.
E
)
O
QUIPPED
Before
must
be
cooled
before
damaging
the
WARNING
WARNING
SECTION 13 – EXTERIOR
13-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents