System Log Screens; Log Setting Screen - ZyXEL Communications WAH7003 User Manual

Figure 46 System > Language

9.9 System Log Screens

The Web Configurator allows you to look at all of the WAH7003's logs in one location.

9.9.1 Log Setting Screen

Use this screen to specify which logs to display in the Log Display screen and to where the
WAH7003 is to send logs. Click System > Log Setting. The screen displays as shown.
Figure 47 System > Log Setting
The following table describes the labels in this screen.
Table 40 System > Log Setting
LABEL
Enable Log
Log Level
Enable Remote Log
Remote Log Host
Remote Log Port
Apply
Chapter 9 System
DESCRIPTION
Select On to enable system logging. Otherwise, select Off and the WAH7003 will not
record the logs.
Select the level of the logs that the WAH7003 is to record and send to the syslog server.
The WAH7003 displays and records the logs with the level equal to or higher than what
you selected.
Select On to enable syslog logging. Otherwise, select Off.
Syslog logging sends a log to an external log server.
Enter the server name or IP address of the syslog server that will log the selected log
level of logs.
Enter the port number of the syslog server.
Click Apply to save your changes back to the WAH7003.
WAH7003 User's Guide
70