Panasonic Touchbook CF-71 Series Reference Manual page 24

Using PC Cards
PC Card Utility Program
About Phoenix Card Executive
When using a Windows NT
Windows NT ® is installed. If [Card Executive 2.0 for NT] is displayed in the [Control
Panel], this indicates that the program is installed.
If Phoenix Card Executive
®
disk or Windows NT Service Pack has been reinstalled, reinstall Phoenix Card
TM
Executive 2.0 for Windows NT
1
Select [Start] - [Run].
2
Type "c:\util\drivers\pccard\setup.exe", press [OK], then follow the on-screen in-
structions.
TM 2.0 for Windows NT
® model, confirm that Phoenix Card Executive™ 2.0 for
TM ®
2.0 for Windows NT has been uninstalled, or the hard
®
.
24
®