Panasonic CF-M34 Reference Manual page 45

LAN
Using the computer as a network computer
When using the computer as a network computer, some additional settings may have to
be made depending on the usage conditions. We recommend asking your system ad-
ministrator or the person in charge of the network.
NOTE
Do not use standby or hibernation functions during communications.
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking
your system administrator or the person in charge of the network.
Unable to connect to network (When the indicator of your HUB unit does not
light):
Windows 98
1 Select [Network] in [Start] - [Settings] - [Control Panel].
2 Select [Intel 8255x-based PCI Ethernet Adapter (10/100)] in [Configuration] .
3 Select [Properties].
4 Select [Advanced].
5 Select [Link Speed & Duplex] from [Property], and set [Value] to the communi-
cation speed (10 Mbps or 100 Mbps) suitable for your HUB unit, and then
select [OK].
Windows 2000
1 Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] -
[Hardware].
2 Select [Intel 8255x-based PCI Ethernet Adapter (10/100)] from [Network adapt-
ers].
3 Select [Action] - [Properties]
4 Select [Advanced].
5 Confirm the settings of each items.
Windows NT
1 Select [Adapters] in [Start] - [Settings] - [Control Panel] - [Network].
2 Select [Intel 8255x based PCI Ethernet Adapter (10/100)].
3 Select [Properties].
4 Confirm the settings of each items.
45