Wall Oven Control Pad Features - Kenmore 790.4784 Use & Care Manual

Wall Oven Control Pad Features

Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVEN CLOCK SET
INTERIOR PAD Used to
LIGHT PAD set the time
Used to turn of day.
oven interior light
ON and OFF.
TIMER SET/OFF PAD
Used to set or cancel
the minute timer. The
minute timer does not
start or stop cooking.
Also, TIMER SET/OFF
Pad is used to set the
Continuous Bake
Feature.
SELECT CLEAN
PAD Used to select
the Self-Cleaning
cycle. A 2, 3 or 4 hour
Self-Clean time may
be selected (some
models).
DELAY START PAD Used to set the
desired start time for baking. May be
used with COOK TIME to program a
delayed bake cycle or to program a
delayed clean cycle.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation.
1. To tell if your oven is set for normal or silent operation press and hold
appears in the display.
2. Within 5 seconds, press the
The display will show either "- - " or "SP".
3. Wait 5 seconds to return to normal operating mode.
If "SP" appears, the control will operate with normal sounds and beeps. If "- - " appears, the control is in the silent
operation mode.
Temperature Conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
Broil
1. Press and hold
2. Press the or pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press
COOK TIME UP and DOWN ARROWS PADS Used
PAD Used to along with the function pads to select
enter the length oven temperature, cook time, start time
of the baking (when programming an automatic start
time. time), time of day, clean time and
minute timer.
Cook
Time
Select Timer Delay
Clean Set/Off Start
OVEN, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light
will glow each time the oven is turned on. The "Preheat" light
will glow when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature.
The "Door Locked" light will flash until the door locks when the
self-clean cycle is in use. It glows constantly after the door locks
(some models).
or pad to switch between normal sound operation and silent operation mode.
(Fahrenheit / Celsius)
for 7 seconds until °F or °C appears in the display.
ADD 1 MINUTE PAD Used to add 1
minute to the Timer Countdown. This
feature works with the Kitchen Timer
only and does not affect any cook time
or start time functions. (some models).
Add 1
Minute
Oven
Preheat
Door Locked
Delay
Start
STOP
to accept the changes.
Clear
18
Bake
Bake Broil
STOP
Warm &
Hold
Clear
Oven
3
Lockout
STOP CLEAR PAD— Used to clear
any function previously entered
except the time of day and minute
timer. Press STOP CLEAR to stop
cooking. Also the STOP CLEAR
pad is used to activate oven lockout
setting. (some models).
for 7 seconds. "- - " or "SP" (speaker)
BAKE PAD—
Used to select
the bake
function.
FEATURE
INDICATOR
LIGHTS—
These lights
show which
feature is in
use.
BROIL PAD—
Used to select
the variable
broil function.
WARM &
HOLD PAD—
Used to set the
Warm & Hold
feature.