Table of Contents
Advertisement
Wall
Note:
Oven Control Pad Features
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide.
READ THE INSTRUCTIONS
CAREFULLY
BEFORE USING THE OVEN.
For satisfactory
use of your oven, become
familiar with the various functions of the oven as described below,
OVEN
INTERIOR
LIGHT PAD
Used to turn
oven interior light
ON
CLOCK SET
COOK TiME
UP and DOWN ARROWS PADS Used
ADD 1 MINUTE PAD Used to add 1
BAKE PAD--
PAD Used to
PAD Used to
along with the function pads to select
minute to the Timer Countdown.
This
Used to select
set the time
enter the length
oven temperature,
cook time, start time
feature works with the Kitchen Timer
the bake
of day.
of the baking
(when programming
an automatic
start
only and does not affect any cook time
function.
time.
time), time of day, clean time and
or start time functions.
(some models).
minute timer.
TIMER SET/OFF
PAD
Used to set or cancel
the minute timer. The
minute timer does not_...
start or stop cooking.
Also, TIMER SET/OFF
Pad is used to set the
®
®
®
iNDiCATOR
LIGHTS--
These lights
show which
feature is in
use.
BROIL PAD--
Continuous
Bake
_
_
_
_
Used to select
Feature.
(Select_
( Delay_
• Oven
(_'_
_
the variable
\ _'_"" ]
\ 2""
]
\_/
_
broil function.
SELECT CLEAN
_
O Preheat
",_0"q_/
_
PAD Used t oselect
Daor Looke,
WARM &
the Self-Cleaning
_
/
_
HOLD PAD--
cycle. A 2, 3 or 4 hour
_
/,,,mp__
_
Used to set the
Self-Clean time may
_
/
_
_
Warm & Hold
be selected (some
/
\
feature.
models).
...........................................
_
.......................
. ............................
\ ..............
OVEN, PREHEAT & DOOR LOCK LIGHTS
The "Oven"
light
STOP CLEAR PAD--
Used to clear
will glow each time the oven is turned on. The "Preheat"
light
any function previously
entered
DELAY START PAD Used to set the
will glow when the oven is first set to operate, or if the desired
except the time of day and minute
desired start time for baking. May be
temperature
is reset higher than the actual oven temperature,
timer. Press STOP CLEAR to stop
used with COOK TiME to program a
The "Door
Locked" light will flash until the door locks when the
cooking. Also the STOP CLEAR
delayed bake cycle or to program a
self-clean cycle is in use. It glows constantly
after the door locks
pad is used to activate oven lockout
delayed clean cycle.
(some models),
setting. (some models).
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent
control
panel:
When choosing a function, a beep will be heard each time a pad is pressed.
If desired, the control can be programmed
for silent operation.
1.
To tell if your oven is set for normal or silent operation press and hold _s_l,_for 7 seconds. % = " or "SP" (speaker)
appears in the display.
2.
Within 5 seconds, press the A or v
pad to switch between normal sound operation and silent operation mode.
The display will show either % - " or "SP".
3.
Wait 5 seconds to return to normal operating mode.
If "SP" appears, the control will operate with normal sounds and beeps. If "- - " appears, the control is in the silent
operation mode.
Temperature
Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
should
not be in a Bake or Clean mode):
1.
Press and hold
for 7 seconds until °F or °C appears in the display.
2.
Press the A or v
pad to change °F to °C or °C to °F.
3.
Wait 5 seconds to accept the changes or press (_t") to accept the changes.
18
Hide quick links:
Advertisement
Table of Contents
